Spit C-Mix Plus Styrene-Free Polyester Resin Cartridge 300ml

Summary

The Spit C-Mix Plus is a universal, medium-performance styrene-free polyester chemical mortar supplied in a 300ml cartridge. Designed for internal anchoring applications, it delivers rapid cure times to maximise installation efficiency. Suitable for tradespeople and DIY users working with threaded studs and rebar in concrete, solid masonry, and hollow substrates with mesh sleeves.

Features

• Styrene-free formulation allows safe use in confined and poorly ventilated spaces without excessive odour.
• Fast-curing chemical mortar minimises waiting time between injection and fixture loading.
• Compatible with standard skeleton/silicone guns for straightforward application from the 300ml cartridge.
• Suitable for use with mesh sleeves in hollow substrates, expanding the range of fixing scenarios.
• Accommodates threaded studs from M6 to M16, covering the most common anchoring requirements.
• Expansion-free anchoring system permits reduced edge and spacing distances compared to mechanical anchors.
• Environmentally responsible formulation with an A+ Volatile Organic Compound (VOC) rating.
• Approved by Transport for London Underground and Socotec for non-safety-critical fixing applications.
• Operating temperature range of 5degC to 30degC ensures reliable performance across typical site conditions.
• Long shelf life of up to 18 months for cost-effective stock management.

Specifications

• Brand: Spit (ITW Construction Products)
• Part Number: 055866
• Type: Styrene-free polyester chemical mortar
• Cartridge Volume: 300ml
• Colour: Grey
• Stud Range: M6-M16
• Application Temperature: 5degC to 30degC
• VOC Rating: A+
• Application: Internal use only
• Approvals: Socotec; Transport for London Underground
• Shelf Life: Up to 18 months

What's Included

• 1 x 300ml C-Mix Plus polyester resin cartridge
• Mixer nozzle(s) (quantity may vary by retailer - typically 1-2 nozzles included)